NOTE:  Following Santa Fe Forum topic is provided only in the event it gets drops off if the rolls.
  The original can be located here... Original Forum Topic
   
 
 Santa Fe Forum
    > Installs/How To?/FAQ's
        > CORRECT WAY TO ADJUST MIRRORS
        
Author Comment
doubleclutch
Registered User
Posts: 22
(1/13/02 10:50 am)
 
 CORRECT WAY TO ADJUST MIRRORS
I read a new way to adjust mirrors in a auto magazine about a year ago and really like it. The article noted that most people do not follow this system. The conventional method is to have your outside mirrors looking down each side of the car which gives the greatest priority to the rear and overlooks a big area called the "blind spots". This duplicates the coverage of the inside mirror and gives a choice of 3 mirrors for the rear view with some minimal right and left diagonal perspective in the side mirrors. I had always followed that system in my 40+years of driving.
The author's system is to adjust the side mirrors way out to cover the blind spots and use the inside mirror for the rear view on an exclusive basis. You accomplish this by leaning into the middle of the car while adjusting the right (passenger mirror) and leaning your head left against the drivers window for the left mirror. The advantage is that you always use the center mirror for rear viewing and side mirrors for lane changes. I can't recall a "surprise" in a lane change since I changed. I really like it!

Edited by: TonyOne   at: 2/5/02 1:00:59 pm
Matotek
Registered User
Posts: 30
(1/20/02 9:04 am)
 
 Me Too
This is the way i have always done it and the only draw back is that it is annoying to drive somebody else's car because the mirrors are never adjusted correctly. I lecture people on this and they think I am totally wrong...nice to see someone else siding with me!! It just isn't safe to have them adjusted alongside the car!!!

nmdcommguy
Registered User
Posts: 6
(2/26/02 11:59 am)

 
 Re: Me Too
I've been experimenting this past few weeks with trying to eliminate or at least mitigate the blind spots.

I learned in Driver's Education 25+ years ago to adjust the outside mirrors so you can see the back door handles. Then look over your shoulder to check blind spots before changing lanes. I'm starting to question that technique recently because of how much waste of mirror "real estate" this is.

I'm grateful for this post and will try it.

Thanks

Remag1234
Registered User
Posts: 6
(12/2/02 6:29 pm)
 
 Re: Me Too
Hi,
I agree with the rear view adjustment but I purchased 2 round adjustable mirrors that peel and stick to the rearview. They eliminate blind spots and only cost .99 each. I've used these on my other car for 3 years.

clmoses
Registered User
Posts: 36
(1/2/03 1:20 am)
 
 Re: CORRECT WAY TO ADJUST MIRRORS
I always look over my shoulder but have found that the driver's side rear passenger head rest creates a serious blind spot.

mikerccie
Registered User
Posts: 7
(5/8/03 4:33 pm)
 
 Blind Spot Mirrors
I cheat and get what I think is the best of both worlds. I use a set of cheap 1" or 2" convex fish-eye blind spot mirrors. I've had them on every vehicle I've ever owned. When a car passes me, I will see it in this order:

Rearview Mirror
Driver-side Main Mirror
Driver Side blind-spot-mirror
Peripheral vision through drivers window

 twospirits 
Moderator

Posts: 2526
(5/8/03 8:34 pm)
ezSupporter

 
 Re: Blind Spot Mirrors
I've done like this also, then I got the hood mirrors and I see all the blind spots without taking my eyes off the road as much as I had to.

                       
 
onigoroshi 
Moderator

Posts: 2428
(5/8/03 11:01 pm)

 
 Re: Blind Spot Mirrors
i love my hood mirrors. i think they work better than the convex mirrors i used to have on my side mirrors. you can see more of the side of the vehicle since the mirror is out farther. I've actually folded in my side mirrors and drove with just the hood mirrors. its kind of fun, but it takes some getting used to since you automatically look to the old mirrors first.  

"Shi kin hara mitsu dai ko myo!"

Add Reply




Powered By ezboard® Ver. 7.246j
Copyright ©1999-2003 ezboard, Inc.